News

What are the advantages of double wall corrugated pipe

2022

What material is the double wall corrugated pipe

There are many types of pipes, and the different types of materials have different applications. For example, double-wall corrugated pipes are used for drinking water transportation. What material is the double-wall corrugated pipe? What material is the double wall corrugated pipe It is a high-density polyethylene material, a new type of pipe with a ring-shaped outer wall and a very smooth inner wall. Because of its excellent performance and economic cost, it has been widely promoted and applied in many countries, especially in my country, the promotion and application of double-wall corrugated pipe is on the rise, and all technical indicators can reach the standard of use.

2022

ppr pipe installation method and precautions

The most common problem with PPR water pipes is leaks. Be standardized when installing. 1. When using PPR fittings with metal threads, a foot seal must be used to avoid water leakage at the threads. 2. Do not overtighten the fittings to avoid cracks and leaks. 3. It is best to cut off 4-5cm at both ends of the pipe. 4. During construction in winter, the pipeline should avoid stepping on, knocking, colliding and throwing. 5. A boost test must be performed after installation. The pressure test time is 30 minutes, and the pressure is 8-10 kg, without leakage or leakage. 6. It is best to go to the top of the water pipe for easy maintenance. If it goes underground, it is difficult to find water leakage. 7. If it is found that the wall paint is moldy and blistered, the skirting or wooden floor is black and has fine bubbles, the ceiling and the wall tiles are damp and water seepage, etc., you should check the pipeline as soon as possible.

2022

What problems should be paid attention to when installing PVC drainage pipes

Matters needing attention in the installation of PVC drainage pipes in high-rise buildings (1) Sewage adopts PVC-U core foam drainage pipe, adhesive and flange interface. (2) According to the requirements of the drawings, combined with the actual situation, measure the size according to the position of the reserved opening, and draw the processing sketch (3) Measure the pipe size according to the sketch, and then break the pipe. The fracture should be flush, use a file or scraper to remove the flying spurs inside and outside the fracture, and file the outer edge at an angle of 15°C. (4) Before bonding, the socket and socket should be inserted into the test first, and not all of them should be inserted. Generally, it is 3/4 of the depth of the socket. After the test insertion is qualified, use a cotton cloth to wipe the moisture and dust of the socket to be bonded. If there is oil pollution, acetone is required to remove it. Apply the adhesive with a brush, apply the socket first and then the socket, and then insert it vertically with force. When inserting and bonding, turn the socket a little so that the adhesive is evenly distributed, and it can be firmly bonded in about 30-60 minutes. (5) When installing plastic drainage pipes, lead wires can be used to temporarily hang them for pre-installation. Adjust the coordinates, position, pipeline elevation and slope of the opening to meet the design requirements for bonding, and correct the coordinate position and elevation slope of the opening in time. After the bonding is cured, install the fixed support, but it should not be clamped too tightly. When a metal bracket is used, a rubber gasket must be placed in contact with the outer diameter of the pipe. (6) Inspection ports shall be provided at the lowest and highest floors of the drainage riser, and the center of the inspection port shall be 1.0 meters away from the ground. (7) After the pipeline is installed, the pipe hole should be blocked in time, and the mold should be blocked according to the requirements of the specification. It is strictly forbidden to climb or borrow the pipeline after installation. According to the above installation method, it can not only achieve the purpose of normal operation of the drainage pipe, but also ensure the normal service life of the PVC drainage pipe. However, we also need to remind that during the use of the pipeline, we must also do a good job of protection, and prohibit strong activities such as stepping on or smashing.

2022

Advantages of PVC plastic pipes

1. High water delivery rate Although PVC plastic pipe is not as good as other materials in terms of flexibility, its compressive ability is very strong. The use of water pipes of this material can ensure that its appearance remains intact after a long-term high-intensity impact by water pressure. In addition, the pipe wall of the PVC plastic pipe is very smooth, and the obstruction to the water flow is very small, which can ensure a high water delivery rate. 2. Strong anti-corrosion ability PVC plastic pipe not only has stable chemical properties, but also has very good corrosion resistance. Under normal circumstances, if a sewer pipe is made of metal material, after a long period of corrosion by acid and alkaline substances, the inside of the pipe will rust or even rot. The PVC plastic pipe has a very long service life, up to about 50 years, and has good corrosion resistance, so it is widely used in the construction of urban sewers. 3. Good water tightness No matter which method is used to connect, PVC plastic pipe has very good water tightness. Due to its smooth surface and strong adhesion, it can ensure that the water flow is not easily leaked.

2022

Is PVC plastic water pipe toxic?

With the rapid development of science and technology, there are more and more decoration materials on the market. Faced with such a variety of decoration materials, many people will have great concerns when choosing, for fear of which materials have toxicity. Take the PVC plastic water pipe as an example, many people worry that it will cause harm to the body after use. Is PVC plastic water pipe toxic? The PVC plastic water pipe itself is not toxic, but if there is no fully polymerized monomer or degradation product, then it will contain a certain degree of toxicity. Because without these products, PVC plastic water pipes will degrade under the irradiation of high temperature and several ultraviolet rays. At this time, our use will cause great harm to our health. Therefore, when we buy pipes, we must look for qualified and powerful manufacturers to avoid buying inferior materials.

2022

What are the pipes commonly used in building water supply projects?

PPR pipe, copper pipe, aluminum-plastic pipe, galvanized pipe, PVC pipe, thin-walled stainless steel pipe, PVC-lined stainless steel pipe. 1. PPR pipe: As a new type of water pipe material, PPR pipe has unique advantages, hygienic and non-toxic, and can be used as both a cold water pipe and a hot water pipe. Advantages: moderate price, stable performance, heat and heat preservation, corrosion resistance, smooth inner wall without scaling, safe and reliable pipeline system, impermeable, service life of up to 50 years. Disadvantages: However, special tools are required for connection, and the connection surface needs to be heated. If the heating time is too long or the socket is inserted too much, the water flow will be blocked. 2. Copper pipe: It is the first-class product in the water pipe. The order of copper in the chemical activity is very low, and it is lower than hydrogen, so it has stable performance and is not easy to corrode. According to relevant information, copper can inhibit the growth of bacteria and keep drinking water clean and hygienic. Advantages: high strength, stable performance, sterilization, and not easy to corrode. Disadvantages: high price and difficult construction. In cold winter, it is easy to cause heat loss, large energy consumption and high use cost. 3. Aluminum-plastic pipe: Aluminum-plastic pipe was once a popular pipe material on the market. Because of its light weight, durability and convenient construction, its bendability is more suitable for use in home decoration. In Guangdong and Shanghai, where the decoration concept is relatively new, the aluminum-plastic pipe has gradually lost its market and belongs to the eliminated product. Advantages: The price is relatively cheap, it can be bent arbitrarily, the surface is smooth, and the construction is convenient. Disadvantages: easy aging, many hidden dangers in use, short service life, practice has proved that the leakage phenomenon is very easy to occur at the pipe connection. 4. Galvanized pipe: When you open a water pipe that has not been used for a long time, you suddenly find "yellow" water flowing out. This kind of thing is very easy to happen in galvanized iron pipes in old houses. Such "yellow" water is also harmful to the human body. . Galvanized pipes have been banned since 2000. At present, galvanized pipes are rarely used in cold water pipes in newly built communities. Advantages: complete varieties, many pipe fittings. Disadvantages: It is an outdated product prohibited by the state, which is easy to corrode and rust, resulting in poor water flow and easy to cause water pollution. 5. PVC pipe: In fact, it is a kind of plastic pipe, and the interface is generally bonded with glue. Because its frost resistance and heat resistance are not good, it is difficult to be used as a hot water pipe; the strength is not suitable for the pressure requirements of water pipes, so cold water pipes are rarely used. In most cases, PVC pipes are suitable for electrical conduits and sewage pipes. In addition, the chemical additive phthalein, which makes PVC softer, has a great impact on the kidneys, liver and testes in the human body, and can cause cancer and kidney damage, so it is not recommended for everyone to buy it. Advantages: light, easy to install, low cost, and not easy to corrode. Disadvantages: Poor quality will be very brittle, easy to break, and easy to deform when heated. 6. Thin-walled stainless steel pipe: Thin-walled stainless steel pipe is corrosion-resistant and not easy to rust, safe and reliable to use, has strong impact resistance, and relatively low thermal conductivity. However, the price of stainless steel pipes is relatively high, and in addition, stainless steel models that are resistant to chloride ions in chlorine water in water should be used. Thin-walled stainless steel pipes are connected by welding, threading, sealing and other methods. Advantages: not easy to oxidize and rust, strong impact, low heat conduction. Disadvantages: high cost, stainless steel models that are resistant to chloride ions in water should be used. 7. PVC-lined galvanized steel pipe: PVC-lined galvanized steel pipe has the advantages of high strength and rigidity of metal pipe and corrosion resistance of plastic pipe, and also overcomes the shortcomings of the two types of materials. Advantages: There are many pipe fittings and complete specifications. Disadvantages: The actual diameter of the pipe used in the pipeline becomes smaller; when the ambient temperature and the temperature of the medium change greatly, it is easy to separate the layer and cause the quality of the pipe to decrease.

2022

What are the advantages of ppr water pipes

It is well known that ppr pipe is a greener, healthier and more environmentally friendly water pipe than traditional water pipes. What are the specific advantages? main advantage 1. Light weight At 20°C, the density is 0.90g/cm3, and the weight is only one-ninth of the steel pipe and one-tenth of the copper pipe. It is light in weight and greatly reduces the construction strength. 2. Good heat resistance The instant use temperature is 95 ℃, and the temperature can reach 75 ℃ when used for a long time. It is the most ideal indoor hot and cold water pipeline at present. 3. Corrosion resistance Non-polar material, chemically resistant to all ions in water and building chemicals, will not rust and corrode. 4. Low thermal conductivity It has good thermal insulation properties and generally does not require additional thermal insulation materials when used in hot water systems. 5, the pipeline resistance is small The smooth inner wall of the pipe makes the resistance along the route smaller than that of the metal pipe, and the energy consumption is lower. 6. The pipe connection is firm With good hot-melt performance, hot-melt connection connects pipes and fittings of the same material into a perfect whole, eliminating the hidden danger of water leakage. 7. Hygienic and non-toxic In the process of production, construction and use, it does not pollute the environment and belongs to green building materials.

2022

< 1 2 >

Guangdong Shengda Plastic Technology Co., Ltd.

（Overseas Chinese board code:280329）

Tel：400-838-1218

Head Office: Room 301, Ultrasonic Technology Building, No. 9 Keji East Road, High-tech Zone, Shantou City, Guangdong Province

Production base: Guangdong Niutianyang Industrial Zone

网址：www.sdgy.com.cn

Fujian Xinshengda New Material Technology Co., Ltd.

Production base: No. 666, Ludi Industrial Park, Zhao'an Industrial Park, Zhao'an County, Zhangzhou City, Fujian Province

Public

Website

闽ICP备2022002879号

Power by：www.300.cn